From beyond the pale - Revenants, Goreblight and some characters join the fray

 The ruins of the castle, once a sad monument to a failed Order, were now a gaping wound in the fabric of life. A cold wind blew and a hoary everfrost clung to dead branches of the woodlands surrounding the tumbled walls.

Perching on a high fell, the slopes of which were of sheer, dark stone, Coldguard Keep was a fastness of a kingdom long since fallen into ruin. Here they had stood against the frozen wraiths during the Long Winter, their faith a shield against the relentless onslaught of ice and death marching down from the North year after year. The passes guarded by the unyielding edifice of Keep, manned in a ceaseless watch by the Knights of Coldguard and the Guard of the Ford, were the rock upon which the waves of Winter's onslaught broke time and again, ever to assail but never to conquer.

And so it would have been, should their vows have held true.

Here they had stood, and here they had fallen, ultimately brought low by the hardening of their hearts, and the subsequent abandoning of their post. Dearly they paid for their forgetfulness, but dearer still is the price yet to be paid, for on Pannithor death is rarely a sanctuary, and never does it settle the debt of betrayal.

The revenge visited upon the Knighs of the Kings was long in the making, and as it oft goes, also bit the avenged just as deep as those it was taken upon. The Necromancer perished at the height of his spell, but the gates to the Underworld had already been opened. Now the dead streamed forth, eager to avenge both their deaths and their unlife to the living.

The courtyard was teeming with unlife. Runed, grave-worn armor was donned, and ghastly heads were covered with mighty helms, as proudly plumed in death as they were in life. Blades, bitten by the bitter turning of the years, now glow with a deathly hunger. Ragged banners were raised, ghostly horns blared in the mountain air. The Guard of the Kings had risen again.

There is a blast of frigid air and a ghostly laughter rising from some deep place echoes through the roofless halls as the King Arisen gallops forth from the gates. Once a brother to the one who came back first, the Cold King, the one who now returns is a creature washed clean of empathy, honor or indeed any thought save to bring ruin and to bring all living things into the icy embrace of Death. Once a mighty captain, and the co-ruler of a powerful kingdom, the one who returned now bears little resemblance to the noble lord, brought low by the tides of fate.

The inner sanctum of the Keep lays in ruins, its stained glass windows shattered into blood red shards and dry, cold dust swirls in the slow drafts of air that sigh and moan through the corridors. In the centre of it all there is a gateway of massive stone slabs. Once leading down into the crypts of Kings, it now opens to sheer nothingness. Not a darkness, but a desolate deepness gapes under its massive lintel.

From the shapeless opening a shape begins to emerge, while the echoes of the necromancers unholy spell give form to yet another abomination. A faceless creature emerges, clad in bony armor and sinew crafted from the flayed souls of the dead. This creature is not something brought back, but something altogether foreign, a creature native to the sunless lands. Driven by hunger, its very presence seeps the life from all those around it. As it lays a massive, clawed foot onto the stones, an unseen miasma begings to spread and the stones of the ruined castle groan in protest to its presence.

The thing that should not be has come, a Goreblight has emerged, nerver-living, yet ever hungering.

Worst of the Undead are those that are neither forced by others nor bound into any will save their own. The Keep, once the domain of Kings, is now the seat of a deadlier power than any there has held before. A Liche Queen, once a mighty mage-queen, now guides the Dead with an iron will. With a voice devoid of the warmth of life she now commands her legions, and all are subject to her will. A single word from her ethereal lips can freeze a hearty warrior to the bone and a single motion of her hand can call the dead from their graves.

Greetings, fellow KoWsters!

After a longish break from this blog, I decided that it's time to revive it as 2021 is showing some promise when it comes to hobby opportunities. With those opportunities also my hobby mojo is coming back and with that, the graveyard that is my hobby desk is receiving more than sad glanses and forlorn moments of silent reflection. Dust has once again been driven into the small, dark spaces under the paint racks, and water once again sparkles in the cup at the paint station f.

Lately my desk has been filled with Revenants from Mantic and a repurposed Plague first gen mutant and I've also seen an unexpected return by the second Revenant King that I built more than a year ago.

Multibasing my revenants

Mutibasing is one of the coolest things about KoW. it gives me the freedom of expression rarely achieved when basing models on single bases. The small dioramaesque interactions and the ability to create different feels to different units really bring the units to life. Is this unit a ragtag mass of frenzied critters or perhaps a well-ordered, cohesive fighting force? Both can be expressed with ease, along with a multitude of other things.

For my Revenants I wanted to stick to my ruined castle theme, this time crafting the front courtyard of the castle's main hall. Mantic's plastic bases are an excellent material for building bases as polycement makes the structures very sturdy once it dries properly. I used them for the flagstones of the castle stairs, while I clipped and cleaned their sprues for the colums and masonry of the cracked doorway arch. Two Basilean horses donated their heads to make ornaments above the doorway: one still on the wall, the other fallen and cracked, to be almost buried in snow. I carved out the central circular holes to make stained glass windows, using plasticard for the glass panes themselves.

The main problem when making stuff yourself is getting enough detail into the base. With this base I tried to add detail by making cracks and chipped edges to the stonework, while also making sure enough (but not too much, mind you!) is happening on the base. These bases feature ruined walls, crumbled masonry and broken glass and also stone braziers, filled with ghostly flames from which more Revenants are rising. 

I knew I was mainly going for a Horde, so I planned the entire base before getting to work on the models themselves. I use 3mm MDF for the bases as it provides some additional resilience to warping from PVA and other water-based materials. Previously I've used warbases.co.uk, but I probably need to find another provider due to the Charlie Foxtrot known as brexit.

I usually use some pen-and-paper sessions to draw concepts and to map out materials needed, build order and possible problems. This Horde breaks down into three parts; a regiment and two troops. I don't expect to use them a whole lot, but who knows. I wanted to strive to minimize transitions from one separate base to the next when they're put together. That means "themes", or parts of bases need to continue from one to the next, which is problematic when I also decided to go for minimal overhang. Some people like to go for a dynamic feel with the miniatures hanging far over their base, but I find this to be an inconvenience during games as fitting units flush together becomes difficult.

In this base the themes carried over is for one the broken wall of the castle, which runs in a direct line on both the regiment base and the rear troop base. The two troops have a few things that "carry over", a fallen bit of masonry spans both bases and some stained glass, also. Another continuing theme is the stairs, as both the regiment base and the front troop have an identical, short stair. 

The goal is to have a unit that looks tied together without being boring. I also wanted an.. organic? look to the base, meaning I didn't want it look like a flat piece of wood that I glued a miniature ruin on and then threw in some models. Using a piece of MDF and just gluing some random ruins on it usually leaves very little reasonable interaction between the base and the models. 

What I mean by reasonable interaction is simply that models need to look like they're moving through whatever is on the base, and that means the base needs to look like there is some reasonable continuation of whatever is on the base that can be imagined to continue around it. I think you shouldn't glue a horse in full gallop so its hind legs are touching a wall (I mean, how the hell did that horse accelerate to full tilt with one stride?), nor should you just throw a random goblin on the roof of some partially ruined building that's on the base (I mean, sure, goblins are weird, but the single dude haphazardly glued to the roof rarely adds the desired effect). A horse clearing a fence is cool, an ogre crashing through a fence is cool, a dwarf fording a running stream is cool. All these require something else than just having a random ruin on the base.

Now my goal isn't to moan about other people's basing, but more to explain the thought process behind mine. I wanted my Revenants to look like they're marching through the ruined castle and that means the models must be positioned so that a person looking at the base can kind of see the motion even if it isn't there.

Ice and snow

The fun part about basing my Undead is the winter theme. Snow and ice present a challenge as they have a very recognizable look and feel to them, which is difficult to capture at this scale. One problem with creating realistic snow bases is that once there's quite a bit of snow, the snow is everywhere. It's not clumped, it's not here and there. It's everywhere. Every surface that's not vertical will be covered by it, and every nook and cranny will be filled up with it. The magical winter wonderland that's super pretty in early February in Finland looks really really boring when recreated as a base. That's why I decided that I'd rather strive for a look that looks realistic rather than is realistic.

The recipe for my icicles I stole from a long-lost youtube video, and it's simple. Using clear plastic, such as is found on the flyer base stems and sprues, I heat the plastic over a candle until it gets a sheen to it and starts to bend slightly. It's important to be patient, it takes a little while and you shouldn't try to speed the process by getting too close to the flame, otherwise you'll get soot on your icicle.

Once the plastic is malleable, I gently pull the ends away from each other. This creates the icicly narrowing shape. Be careful not to pull the ends too far apart, as this will snap the plastic and the narrow parts will curl before they cool. Once you reach the desired thinness, hold the plastic in place for roughly half a minute, as this will allow the plastic to cool down.

I am yet to manage a totally sharp icicle, but I am also yet to try.

Snow is a little tricky, and I ended up using Army Painters snow flow, glued with oodles of superglue layer upon layer until I achieved the thickness I wanted. What I wrote above about snow forming a uniform cover isn't necessarily true always and everywhere. Cold doesn't yet mean snow, at least not a lot of it, because snow = rain, and there are plenty of cold, dry places where there is snow, yes, but it's not a deep cover. That is a whole lot easier to manage.

A thing to keep in mind is that snow is usually soft and must be waded through. That's why it's usually a good idea to make the base, add the models and then add the snow as that allows for a move realistic interaction between the snow and the models. Patience is key, and if you're using snow flock, then multiple thin layers is the way to go.

For the Goreblight I went for a look that the monster is dragging a victim caught in its chains through the snow. which was a bit of a pickle since snow does yield under weight, but doesn't get easily brushed completely off. I went for a compromise with some stone showing under the lady-in-distress, as I think it made the movement more apparent even without me explaining what's going on.

Snow can form uneven piles, but that requires two things: constant cold temperatures that keep the snow from becoming dense, and wind. The constant cold is easy enough to imagine, but that would mean that there should be NO icicles on my base, as icicles start forming when the snow melts in sunshine, but the temperature hangs below freezing. This wouldn't do, so damned be realism! I wanted big, dramatic icicles with banks of snow, so I made big, dramatic icicles with banks of snow.

Next up: a story about hobby related vanity project.

Cheers and thanks for reading!

AoW